Difference between revisions of "Site Camera"
From Cues
Jump to navigationJump to search| Line 1: | Line 1: | ||
The camera at the site is an [http://www.axis.com/products/cam_232dp/index.htm Axis 232D+] | The camera at the site is an [http://www.axis.com/products/cam_232dp/index.htm Axis 232D+] | ||
| − | From the site computer you can access it via [http:// | + | From the site computer you can access it via [http://192.168.0.90/]: |
To manually drive the camera: | To manually drive the camera: | ||
Pan "X" (Example, change the last number so alter coords): | Pan "X" (Example, change the last number so alter coords): | ||
| − | curl "http:// | + | curl "http://192.168.0.90/axis-cgi/com/ptz.cgi?camera=1&panbar=194,horisontal&barcoord=?149,9" |
Tilt "Y" (Example, change the last number so alter coords): | Tilt "Y" (Example, change the last number so alter coords): | ||
| − | curl "http:// | + | curl "http://192.168.0.90/axis-cgi/com/ptz.cgi?camera=1&tiltbar=194,vertical&barcoord=?13,75" |
Little script to point the camera is at ~cues/bin/pointimage... tho I still need to figure out exactly how the coord system works on the camera. Entering the same coords over and over actually shift the camera so movement may be relative to the current position rather than based on some absolute...? | Little script to point the camera is at ~cues/bin/pointimage... tho I still need to figure out exactly how the coord system works on the camera. Entering the same coords over and over actually shift the camera so movement may be relative to the current position rather than based on some absolute...? | ||
| Line 28: | Line 28: | ||
Zoom (this doesn't actually werk, trying to get some info on how to zoom): | Zoom (this doesn't actually werk, trying to get some info on how to zoom): | ||
| − | http:// | + | http://192.168.0.90/incl/specialzoomcmd.shtml?camNo=1&zoombar=178&coord=?139,15 |
Get an image: | Get an image: | ||
| − | curl "http:// | + | curl "http://192.168.0.90/axis-cgi/jpg/image.cgi?resolution=4CIF" -o foo.jpg |
| − | curl "http:// | + | curl "http://192.168.0.90/axis-cgi/jpg/image.cgi?resolution=4CIF" -o CUES-`date +%Y%m%d-%H%M`.jpg |
On 20090910: | On 20090910: | ||
| Line 38: | Line 38: | ||
Firmware version: 4.41.1 | Firmware version: 4.41.1 | ||
MAC address: 00:40:8C:89:47:DC | MAC address: 00:40:8C:89:47:DC | ||
| − | IP: | + | IP: 192.168.0.90 |
Administrator username: root, reason passwd | Administrator username: root, reason passwd | ||
Operator username: cues, reason passwd. | Operator username: cues, reason passwd. | ||
Latest revision as of 09:54, 11 September 2017
The camera at the site is an Axis 232D+
From the site computer you can access it via [1]:
To manually drive the camera:
Pan "X" (Example, change the last number so alter coords):
curl "http://192.168.0.90/axis-cgi/com/ptz.cgi?camera=1&panbar=194,horisontal&barcoord=?149,9"
Tilt "Y" (Example, change the last number so alter coords):
curl "http://192.168.0.90/axis-cgi/com/ptz.cgi?camera=1&tiltbar=194,vertical&barcoord=?13,75"
Little script to point the camera is at ~cues/bin/pointimage... tho I still need to figure out exactly how the coord system works on the camera. Entering the same coords over and over actually shift the camera so movement may be relative to the current position rather than based on some absolute...?
UpRadiometers:
~/bin/pointimage 180 180 180 50
- X,Y=0,0 points at the Whites, support bar on left side of screen.
- X,Y=90,0 -> MidChalet/Chair-1
- X,Y=125,70 -> UpRadiometers.
- X,Y=115,0 -> Minarets.
- X,Y=135,0 -> San Juaquin Ridge
- X,Y=180,180 -> Support Pole.
- X,Y=90,180 -> MidChalet/Chair-1
- X,Y=45,180 -> Pond/IBeam
Zoom (this doesn't actually werk, trying to get some info on how to zoom):
http://192.168.0.90/incl/specialzoomcmd.shtml?camNo=1&zoombar=178&coord=?139,15
Get an image:
curl "http://192.168.0.90/axis-cgi/jpg/image.cgi?resolution=4CIF" -o foo.jpg curl "http://192.168.0.90/axis-cgi/jpg/image.cgi?resolution=4CIF" -o CUES-`date +%Y%m%d-%H%M`.jpg
On 20090910:
Firmware version: 4.41.1 MAC address: 00:40:8C:89:47:DC IP: 192.168.0.90 Administrator username: root, reason passwd Operator username: cues, reason passwd.
The PDF's for the camera are in the Documents folder at site.
