Difference between revisions of "Site Computer"
| (15 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | System name is CUES-Mini, it's at 192.168.220.251 on the MMSA Employee Net and at | + | System name is CUES-Mini, it's at 192.168.220.251 on the MMSA Employee Net and at 8.12.165.155 from anywhere. |
| + | |||
| + | 20150324: 1.75Mbps download, 0.17Mbps upload. | ||
| + | 20150326: 1.81Mbps download, 0.21Mbps upload. | ||
==TeamViewer== | ==TeamViewer== | ||
| − | CUES-Win: 165 385 363 | + | *2014-CUES-Win: 165 385 363 |
| − | + | *2014-New CUES-Mac: 164 092 848 | |
| − | CUES-Mac: 173 704 513 | + | Older entries |
| + | *CUES-Win-new: 294 636 003 | ||
| + | *CUES-Mac: 173 704 513 | ||
| + | *New CUES-Win: 294 594 032 | ||
| + | *MASC: 974 763 535 | ||
==VNC over SSH== | ==VNC over SSH== | ||
| Line 15: | Line 22: | ||
The key bit is the login tunnel: | The key bit is the login tunnel: | ||
| − | ssh | + | ssh c...@8.12.165.155 -L 5900:localhost:5900 |
Then, on the Mac anyhow, you'll fire up a VNC session (Command-K from the Finder) and enter: | Then, on the Mac anyhow, you'll fire up a VNC session (Command-K from the Finder) and enter: | ||
vnc://localhost:0 | vnc://localhost:0 | ||
| + | |||
| + | ==LiDAR== | ||
| + | ===Power Cycling the LiDAR remotely=== | ||
| + | *Get onto the CUES system at the site (SHOULD work from either the Mac or Win system) | ||
| + | *Open up a cygwin or command terminal. | ||
| + | *ssh c...@192.168.0.254 | ||
| + | **standard passwd you should all know. | ||
| + | **It'll take a short while to login and then give you a "Sentry" prompt. | ||
| + | *off | ||
| + | *LiDAR | ||
| + | *wait 5 seconds or humm the Jeapordy Tune. | ||
| + | *on | ||
| + | *LiDAR | ||
==Networks== | ==Networks== | ||
| − | en0 (MMSA): | + | en0 (MMSA ResNet): |
192.168.220.251 | 192.168.220.251 | ||
255.255.255.0 | 255.255.255.0 | ||
| Line 29: | Line 49: | ||
SME | SME | ||
| − | en2 (CUES): | + | en2 (CUES Pre-20110920 private subnet): |
10.1.1.251 | 10.1.1.251 | ||
255.255.255.0 | 255.255.255.0 | ||
10.1.1.1 | 10.1.1.1 | ||
| − | en3 ( | + | en3 (CUES Mac on Private subnet): |
192.168.0.251 | 192.168.0.251 | ||
| − | + | Data Loggers: | |
| − | *IP | + | *CR3000-1: IP: 192.168.0.101 |
| + | *CR3000-2: IP: 192.168.0.102 | ||
| + | *CR3000-3: IP: 192.168.0.103 | ||
LiDAR: | LiDAR: | ||
| − | *IP 192.168.0. | + | *IP 192.168.0.234 |
| + | |||
| + | LiDAR IP-Power Switched CDU [http://www.servertech.com/products/switched-pdus/switched-pdu-cw-2h-ipm-2 Manual]: | ||
| + | *IP: 192.168.0.254 | ||
| + | |||
| + | Camera: | ||
| + | *IP: 192.168.0.90 | ||
==Backups== | ==Backups== | ||
Latest revision as of 10:24, 26 March 2015
System name is CUES-Mini, it's at 192.168.220.251 on the MMSA Employee Net and at 8.12.165.155 from anywhere.
20150324: 1.75Mbps download, 0.17Mbps upload. 20150326: 1.81Mbps download, 0.21Mbps upload.
Contents
TeamViewer
- 2014-CUES-Win: 165 385 363
- 2014-New CUES-Mac: 164 092 848
Older entries
- CUES-Win-new: 294 636 003
- CUES-Mac: 173 704 513
- New CUES-Win: 294 594 032
- MASC: 974 763 535
VNC over SSH
Getting onto the system from the outside:
I've got the site system accepting VNC connections via an SSH tunnel. Here's a good VNC over SSH HowTo.
That's designed for the Mac but you'll get the idea. Username is "cues".
The key bit is the login tunnel:
ssh c...@8.12.165.155 -L 5900:localhost:5900
Then, on the Mac anyhow, you'll fire up a VNC session (Command-K from the Finder) and enter:
vnc://localhost:0
LiDAR
Power Cycling the LiDAR remotely
- Get onto the CUES system at the site (SHOULD work from either the Mac or Win system)
- Open up a cygwin or command terminal.
- ssh c...@192.168.0.254
- standard passwd you should all know.
- It'll take a short while to login and then give you a "Sentry" prompt.
- off
- LiDAR
- wait 5 seconds or humm the Jeapordy Tune.
- on
- LiDAR
Networks
en0 (MMSA ResNet): 192.168.220.251 255.255.255.0 192.168.220.1 SME
en2 (CUES Pre-20110920 private subnet): 10.1.1.251 255.255.255.0 10.1.1.1
en3 (CUES Mac on Private subnet): 192.168.0.251
Data Loggers:
- CR3000-1: IP: 192.168.0.101
- CR3000-2: IP: 192.168.0.102
- CR3000-3: IP: 192.168.0.103
LiDAR:
- IP 192.168.0.234
LiDAR IP-Power Switched CDU Manual:
- IP: 192.168.0.254
Camera:
- IP: 192.168.0.90
Backups
System is running TimeMachine onto "CUES-TimeMachine" drive which is a 160GB laptop drive plugged in via USB. The VMware Fusion system is set to take Auto-SnapShots in order to keep from having to backup the entire VM every TimeMachine instance as explained here.
Colee is also keeping a CCCloner copy of the system at UCSB.
