Site Camera - Revision history

Mtc at 17:54, 11 September 2017

2017-09-11T17:54:58Z

Mtc at 00:20, 14 October 2009

2009-10-14T00:20:48Z

Mtc at 00:09, 13 October 2009

2009-10-13T00:09:08Z

Mtc at 22:06, 12 October 2009

2009-10-12T22:06:00Z

Cues at 23:56, 12 September 2009

2009-09-12T23:56:39Z

Cues at 23:55, 12 September 2009

2009-09-12T23:55:05Z

Cues at 22:12, 10 September 2009

2009-09-10T22:12:28Z

Cues at 22:11, 10 September 2009

2009-09-10T22:11:10Z

Cues at 20:05, 10 September 2009

2009-09-10T20:05:57Z

Cues at 20:05, 10 September 2009

2009-09-10T20:05:37Z

@@ Line 1: / Line 1: @@
 The camera at the site is an [http://www.axis.com/products/cam_232dp/index.htm Axis 232D+]
-From the site computer you can access it via [http://10.1.1.90]:
+From the site computer you can access it via [http://192.168.0.90/]:
 To manually drive the camera:
 Pan "X" (Example, change the last number so alter coords):
-  curl "http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&panbar=194,horisontal&barcoord=?149,9"
+  curl "http://192.168.0.90/axis-cgi/com/ptz.cgi?camera=1&panbar=194,horisontal&barcoord=?149,9"
 Tilt "Y" (Example, change the last number so alter coords):
-  curl "http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&tiltbar=194,vertical&barcoord=?13,75"
+  curl "http://192.168.0.90/axis-cgi/com/ptz.cgi?camera=1&tiltbar=194,vertical&barcoord=?13,75"
 Little script to point the camera is at ~cues/bin/pointimage... tho I still need to figure out exactly how the coord system works on the camera.  Entering the same coords over and over actually shift the camera so movement may be relative to the current position rather than based on some absolute...?
@@ Line 28: / Line 28: @@
 Zoom (this doesn't actually werk, trying to get some info on how to zoom):
-  http://10.1.1.90/incl/specialzoomcmd.shtml?camNo=1&zoombar=178&coord=?139,15
+  http://192.168.0.90/incl/specialzoomcmd.shtml?camNo=1&zoombar=178&coord=?139,15
 Get an image:
-  curl "http://10.1.1.90//axis-cgi/jpg/image.cgi?resolution=4CIF" -o foo.jpg
+  curl "http://192.168.0.90/axis-cgi/jpg/image.cgi?resolution=4CIF" -o foo.jpg
-  curl "http://10.1.1.90//axis-cgi/jpg/image.cgi?resolution=4CIF" -o CUES-`date +%Y%m%d-%H%M`.jpg
+  curl "http://192.168.0.90/axis-cgi/jpg/image.cgi?resolution=4CIF" -o CUES-`date +%Y%m%d-%H%M`.jpg
 On 20090910:
@@ Line 38: / Line 38: @@
 Firmware version: 4.41.1
 MAC address: 00:40:8C:89:47:DC
-IP: 10.1.1.90
+IP: 192.168.0.90
 Administrator username: root, reason passwd
 Operator username: cues, reason passwd.

@@ Line 10: / Line 10: @@
 Tilt "Y" (Example, change the last number so alter coords):
   curl "http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&tiltbar=194,vertical&barcoord=?13,75"
 *X,Y=0,0 points at the Whites, support bar on left side of screen.

@@ Line 11: / Line 11: @@
   curl "http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&tiltbar=194,vertical&barcoord=?13,75"
-X,Y=0,0 points at the Whites, support bar on left side of screen.
+*X,Y=0,0 points at the Whites, support bar on left side of screen.
-X,Y=270,180 ->
+*X,Y=90,0 -> MidChalet/Chair-1
-X,Y=180,180 -> Support Pole.
+*X,Y=125,70 -> UpRadiometers.
-X,Y=90,180 -> MidChalet/Chair-1
+*X,Y=115,0 -> Minarets.
-X,Y=45,180 -> Pond/IBeam
+*X,Y=135,0 -> San Juaquin Ridge

@@ Line 5: / Line 5: @@
 To manually drive the camera:
-Pan (Example, change the last number so alter coords):
+Pan "X" (Example, change the last number so alter coords):
-  http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&panbar=194,horisontal&barcoord=?149,9
+  curl "http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&panbar=194,horisontal&barcoord=?149,9"
 Zoom (this doesn't actually werk, trying to get some info on how to zoom):

@@ Line 5: / Line 5: @@
 To manually drive the camera:
-Pan:
+Pan (Example, change the last number so alter coords):
   http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&panbar=194,horisontal&barcoord=?149,9
-Tilt:
+Tilt (Example, change the last number so alter coords):
   http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&tiltbar=194,vertical&barcoord=?13,75

← Older revision		Revision as of 23:55, 12 September 2009
Line 2:		Line 2:

	From the site computer you can access it via [http://10.1.1.90]:		From the site computer you can access it via [http://10.1.1.90]:
		+
		+	To manually drive the camera:
		+
		+	Pan:
		+	http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&panbar=194,horisontal&barcoord=?149,9
		+
		+	Tilt:
		+	http://10.1.1.90/axis-cgi/com/ptz.cgi?camera=1&tiltbar=194,vertical&barcoord=?13,75
		+
		+	Zoom (this doesn't actually werk, trying to get some info on how to zoom):
		+	http://10.1.1.90/incl/specialzoomcmd.shtml?camNo=1&zoombar=178&coord=?139,15
		+
		+	Get an image:
		+	curl "http://10.1.1.90//axis-cgi/jpg/image.cgi?resolution=4CIF" -o foo.jpg
		+	curl "http://10.1.1.90//axis-cgi/jpg/image.cgi?resolution=4CIF" -o CUES-`date +%Y%m%d-%H%M`.jpg

	On 20090910:		On 20090910:

← Older revision		Revision as of 22:12, 10 September 2009
Line 1:		Line 1:
−	The camera at the site is an [http://www.axis.com/products/~~cam_233d~~/index.htm Axis 232D+]	+	The camera at the site is an [http://www.axis.com/products/cam_232dp/index.htm Axis 232D+]

	From the site computer you can access it via [http://10.1.1.90]:		From the site computer you can access it via [http://10.1.1.90]:

← Older revision		Revision as of 22:11, 10 September 2009
Line 1:		Line 1:
−	The camera at the site is an [http://www.axis.com/products/cam_233d/index.htm Axis ~~233D~~]	+	The camera at the site is an [http://www.axis.com/products/cam_233d/index.htm Axis 232D+]

	From the site computer you can access it via [http://10.1.1.90]:		From the site computer you can access it via [http://10.1.1.90]:

@@ Line 1: / Line 1: @@
 The camera at the site is an [http://www.axis.com/products/cam_233d/index.htm Axis 233D]
-*Dig up the PDF
+From the site computer you can access it via [http://10.1.1.90]:
-*List the IP address for it here and in the Network Notes for the site.
-*make a link to the actual interface...
+On 20090910: