Site Camera

The camera at the site is an Axis 232D+

From the site computer you can access it via [1]:

To manually drive the camera:

Pan "X" (Example, change the last number so alter coords):

curl "http://192.168.0.90/axis-cgi/com/ptz.cgi?camera=1&panbar=194,horisontal&barcoord=?149,9"

Tilt "Y" (Example, change the last number so alter coords):

curl "http://192.168.0.90/axis-cgi/com/ptz.cgi?camera=1&tiltbar=194,vertical&barcoord=?13,75"

Little script to point the camera is at ~cues/bin/pointimage... tho I still need to figure out exactly how the coord system works on the camera. Entering the same coords over and over actually shift the camera so movement may be relative to the current position rather than based on some absolute...?

UpRadiometers:

~/bin/pointimage 180 180 180 50

• X,Y=0,0 points at the Whites, support bar on left side of screen.
• X,Y=90,0 -> MidChalet/Chair-1
• X,Y=125,70 -> UpRadiometers.
• X,Y=115,0 -> Minarets.
• X,Y=135,0 -> San Juaquin Ridge
• X,Y=180,180 -> Support Pole.
• X,Y=90,180 -> MidChalet/Chair-1
• X,Y=45,180 -> Pond/IBeam

Zoom (this doesn't actually werk, trying to get some info on how to zoom):

http://192.168.0.90/incl/specialzoomcmd.shtml?camNo=1&zoombar=178&coord=?139,15

Get an image:

curl "http://192.168.0.90/axis-cgi/jpg/image.cgi?resolution=4CIF" -o foo.jpg
curl "http://192.168.0.90/axis-cgi/jpg/image.cgi?resolution=4CIF" -o CUES-`date +%Y%m%d-%H%M`.jpg

On 20090910:

Firmware version: 4.41.1
MAC address: 00:40:8C:89:47:DC  
IP: 192.168.0.90
Administrator username: root, reason passwd
Operator username: cues, reason passwd.

The PDF's for the camera are in the Documents folder at site.